SWIVEL NUT SETS
- 7 sizes to choose from!
- Used to connect hoses to equipment.
- Click here for 1/4" x 1/4" and 1/4" x 5/16" (nut x barbed end).
For all other sizes see below.
NOTE: These Flare nuts use Nylon Flare Washers whenever there is a metal on metal connection.
You may not need them with Quick Disconnect fittings due to the plastic of the QD, but using Flare Washers insures NO LEAKS.
| CATALOG # |
Flare Nut Size |
Tubing I.D. |
| SwvlNutSet - 04C03264IH |
1/4" |
1/8" |
| SwvlNutSet - 04C01115IH |
1/4" |
5/32" |
| SwvlNutSet - 04C03266IH |
5/16" |
1/4" |
| SwvlNutSet - 04C03267IH |
3/8" |
1/4" |
| SwvlNutSet - 04C03268IH |
3/8" |
3/8" |
| SwvlNutSet - 04C03108IH |
1/2" |
3/8" |
| SwvlNutSet - 04C03109IH |
1/2" |
1/2" |
FITTING NOTE: 04C03115 (5/32") IS NOT SUITABLE for use with the 3/16" BevSeal-Ultra Barrier tubing.
The tubing will not compress down to this size. You must use a 1/4" barb size, such as: 04C03265
