VENTMATIC FAUCET LONG SPOUT - 7.3mm
This aftermarket spout is made specifically for the Vent-Matic Faucet: (Shirron, 2013, 2015 and Perlick 425 series)
It has a 7.3mm exit where-as the standard spout is 10mm.
This spout allows the user to choose which spout to use dependent upon: the type of product, carbonation level, pouring pressure (psi) and flow rate, though a spout like this would typically be used for Stouts and heavier gravity and/or low psi products.
It is made of food grade 304 stainless steel. The cut finish of the stainless is just about mirror finish! The interior lip at the exit is beveled. This will create a liquid imbalance at the tip, allowing all the fluid to exit the spout with NO VAPOR LOCK drips or mis-pours.
- Total length: 2-1/2"
- NOTICE: This does not fit the InterTap faucets
- MADE IN THE U.S.A.
