GROWLER FILLER FOR PERLICK 600-SERIES FAUCETS
Designed to easily fill growlers or bottles right off the tap! Two o-rings create a liquid tight seal within the faucet. Comes with one foot of beer line attached. Works ONLY with Perlick faucets.
We recommend submerging the entire filler in a Star-San solution for at least a few minutes before using to sanitize it. Rinse after use for easy clean up.
Foam can be greatly reduced if the filler and the growler are both at the same temperature as the beverage you are dispensing. Make sure you cap off the growler on foam for longer shelf life.
This model fits the PERLICK STANDARD beer & wine faucets.
NOTE: The Growler filler DOES NOT fit the 500-Series faucets, 545PC Perlick w/ Flow Control Valve or the old 425 w/ screw-in nozzle. The elongated nozzle's diameter is too small.
CLICK HERE for standard U.S. faucets (NADS, etc)
