Universal Kettle made from a legally scrapped beer keg. This kettle is amazingly versatile and can be transformed into a Mash, Sparge , Boil or other kettle of your liking.
- The top has been plasma cut and has a smooth edge to prevent any skin cuts,
- The couplers are welded from the inside, therefore there are no gaps where bacteria could hide
- These kegs have spent their lives "in the trade". There will be scratches and minor dings. There may be embossing on the chine(s). There may be paint logos on the side,
- There are no major dents.
NOTE: You will need to get a 3m scrubbie (the green one, not the blue) and some Ajax to scrub down the inside before use, as a rough cleaning to remove any material deposited during the cutting/welding proceedure.
INCLUDES:
- (1) 1/2" Female Pipe Thread coupler welded to side, approximately 1" above bottom weld seam at a 90^ angle to handle holes.
- (1) 1/2" Female Pipe Thread coupler welded to side, approximately 6" above and to the right of the bottom coupler.
If "Sold Out", please enter your name and email address into the Back in Stock Notification box, shown below. These are in high demand, so you will have 24 to 48 hours to place your order before they are sold out again. If they still show sold out, you will need to re-enter your info in the BiSN box.
This product ships by UPS only.
